 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| CPC1150N 4 Pin SOP OptoMOS(R) Relays Load Voltage Load Current Max RON CPC1150N 350 100 50 Units V mA Features * Small 4 Pin SOP Package * Low Drive Power Requirements (TTL/CMOS Compatible) * No Moving Parts * High Reliability * Arc-Free With No Snubbing Circuits * 1500VRMS Input/Output Isolation * FCC Compatible * No EMI/RFI Generation * Machine Insertable, Wave Solderable * Tape & Reel Version Available Description The CPC1150N is a miniature 1-Form-B solid state relay which uses optically coupled MOSFET technology to provide 1500V of input to output isolation. The efficient MOSFET switches and photovoltaic die use Clare's patented OptoMOS(R) architecture. The optically-coupled input is controlled by a highly efficient GaAIAs infrared LED. The CPC1150N uses Clare's state of the art double molded vertical construction packaging to produce the world's smallest 4 pin SOP package. The CPC1150N offers board space savings of at least 20% over the competitor's larger 4 Pin SOP relay. Approvals * UL / C-UL Recognized Component: File #E76270 * BSI Certified - Certificate #: 8416 Applications * Telecommunications * Telecom Switching * Tip/Ring Circuits * Modem Switching (Laptop, Notebook, Pocket Size) * Hookswitch * Dial Pulsing * Ground Start * Ringer Injection * Instrumentation * Multiplexers * Data Acquisition * Electronic Switching * I/O Subsystems * Meters (Watt-Hour, Water, Gas) * Medical Equipment-Patient/Equipment Isolation * Security * Aerospace * Industrial Controls Ordering Information Part # CPC1150N CPC1150NTR Description 4 Pin SOP (100/tube) 4 Pin SOP (2,000/reel) * For other packaging options, consult factory. Pin Configuration CPC1150N Pinout + Control 1 4 Load - Control 2 3 Load Switching Characteristics of Normally Closed (Form B) Devices 10ms CONTROL +90% +10% TOFF + 90% TON DS-CPC1150N-R1.0 www.clare.com 1 CPC1150N Absolute Maximum Ratings (@ 25 C) Parameter Input Power Dissipation Input Control Current Peak (10ms) Reverse Input Voltage Total Power Dissipation Isolation Voltage Input to Output Operational Temperature Storage Temperature Soldering Temperature (10 Seconds Max.) 1 Min 1500 -40 -40 - Typ Max Units 150 mW 50 mA 1 A 5 V - 4001 mW VRMS +85 C +125 C +220 C Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at these or any other conditions beyond those indicated in the operational sections of this data sheet is not implied. Exposure of the device to the absolute maximum ratings for an extended period may degrade the device and effect its reliability. Derate Linearly 3.33 mw / C Electrical Characteristics Parameter Output Characteristics @ 25C Load Voltage (Peak) Load Current (Continuous) AC Peak 1 Peak Load Current On-Resistance Off-State Leakage Current Switching Speeds Turn-On Turn-Off Output Capacitance Capacitance Input to Output Input Characteristics @ 25C Input Control Current 2 Input Dropout Current Input Voltage Drop Reverse Input Voltage Reverse Input Current 1 2 Conditions - Symbol VL IL ILPK RON ILEAK TON TOFF COUT IF IF VF VR IR Min 2 0.3 0.9 - Typ 25 1 0.9 1.2 - Max 350 120 350 50 5 1.0 2 50 1.4 5 10 Units V mA mA A ms ms pF pF mA mA V V A 10ms IL=90mA VL=350V, IF=2mA IF=5mA, VL=10V IF=5mA, VL=10V 50V; f=1MHz IL=90mA IF=5mA VR=5V Load current derates linearly from 90mA @ 25oC to 70mA @ 85oC. For applications requiring high temperature operation (greater than 60oC) an LED drive current of 10mA is recommended. 2 www.clare.com Rev. 1.0 CPC1150N PERFORMANCE DATA* 35 30 Device Count (N) CPC1150N Typical LED Forward Voltage Drop (Ambient Temperature = 25oC) IF = 5mADC CPC1150N Typical On-Resistance Distribution (Ambient Temperature = 25oC) (Load Current = 90mA) 35 30 Device Count (N) Device Count (N) 25 20 15 10 5 0 CPC1150N Typical Blocking Voltage Distribution (Ambient Temperature = 25oC) 35 30 25 20 15 10 5 0 377.5 388.5 399.5 410.5 421.5 432.5 443.5 Blocking Voltage (V) 25 20 15 10 5 0 1.17 1.19 1.21 1.23 1.25 LED Forward Voltage Drop (V) 38.5 39 39.5 40 40.5 41 41.5 On-Resistance () CPC1150N Typical IF for Switch Operation (Ambient Temperature = 25oC) (Load Current = 90mA) 25 20 15 10 5 0 0.45 0.50 0.55 0.60 0.65 0.70 0.75 LED Current (mA) 25 20 15 10 5 0 CPC1150N Typical IF for Switch Dropout o (Ambient Temperature = 25 C) (Load Current = 90mA) 25 20 15 10 5 0 0.45 0.50 0.55 0.60 0.65 0.70 0.75 CPC1150N Typical Turn-On Time (Ambient Temperature = 25oC) (Load Current = 90mA; IF = 5mA) Device Count (N) Device Count (N) Device Count (N) 0.21 0.22 0.23 0.24 0.25 0.26 0.27 LED Current (mA) Turn-On (ms) 25 20 CPC1150N Typical Turn-Off Time (Ambient Temperature = 25oC) (Load Current = 90mA; IF = 5mA) 180 160 Load Current (mA) 140 120 100 80 60 40 20 0.50 0.60 0.70 0.80 0.90 1.00 1.10 0 CPC1150N Typical Load Current vs. Temperature (IF=0, IL=AC Peak) 0.016 0.014 Leakage (A) 0.012 0.010 0.008 0.006 0.004 0.002 0 CPC1150N Typical Leakage vs. Temperature (Measured across Pins 3 & 4) IL = max rated Device Count (N) 15 10 5 0 Turn-Off (ms) -40 -20 0 20 40 60 80 100 120 -40 -20 0 20 40 60 80 100 Temperature ( oC) Temperature (oC) CPC1150N Typical Blocking Voltage vs. Temperature 430 Blocking Voltage (VRMS) 425 Turn-Off (ms) 420 415 410 405 400 395 -40 -20 0 20 40 o CPC1150N Typical Turn-On vs. Temperature (Load Current = 50mA) 1.000 0.900 0.800 0.700 0.600 0.500 0.400 0.300 0.200 0.100 0 -40 -20 0 20 40 60 Temperature ( oC) 5.000 4.500 4.000 3.500 3.000 2.500 2.000 1.500 1.000 0.500 0 -40 CPC1150N Typical Turn-Off vs. Temperature (Load Current = 50mA) Turn-On (ms) 5mA 10mA 5mA 10mA 80 100 60 80 100 -20 0 20 40 60 80 100 Temperature ( C) Temperature (oC) *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. Rev. 1.0 www.clare.com 3 CPC1150N PERFORMANCE DATA* CPC1150N Typical LED Forward Voltage Drop vs. Temperature LED Forward Voltage Drop (V) 1.8 1.6 1.4 1.2 1.0 0.8 -40 -20 0 20 40 60 (oC) 80 100 120 Temperature CPC1150N Typical Turn-On vs. LED Forward Current (Load Current = 100mA) 0.7 0.6 0.5 CPC1150N Typical Turn-Off vs. LED Forward Current (Load Current = 100mA) 2.0 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0 0 5 10 15 20 25 30 35 40 45 50 LED Forward Current (mA) 50mA 30mA 20mA 10mA 5mA (ms) 0.3 0.2 0.1 0 0 5 10 15 20 25 30 35 40 45 50 LED Forward Current (mA) 60 On-Resistance () 50 40 30 20 10 0 CPC1150N Typical On-Resistance vs. Temperature (Load Current = max rated; IF = 10mA) LED Current (mA) CPC1150N Typical IF for Switch Operation vs. Temperature (Load Current = 50mA) 3.000 2.500 2.000 1.500 1.000 0.500 0 -40 -20 0 20 40 60 80 100 LED Current (mA) 3.000 2.500 2.000 1.500 1.000 0.500 0 -40 (ms) 0.4 CPC1150N Typical IF for Switch Turn-on vs. Temperature (Load Current = 50mA) -40 -20 0 20 40 60 (oC) 80 100 Temperature Temperature (oC) -20 0 20 40 60 80 100 Temperature (oC) 150 Load Current (mA) 100 50 0 -50 -100 -150 CPC1150N Typical Load Current vs. Load Voltage (Ambient Temperature = 25oC) IF = 5mA CPC1150N Energy Rating Curve 1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 10s 100s 1ms 10ms 100ms Time -6 -4 -2 0 2 4 6 Load Current (A) 1s 10s 100s Load Voltage (V) *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. Rev. 1.0 4 www.clare.com CPC1150N MECHANICAL DIMENSIONS 4 Pin SOIC Narrow ("N" Suffix) .38 TYP. (.015 TYP.) 6.096 .102 (.240 .004) .38 x 451/4 (.015 x 451/4 ) 3.81 .08 (.150 .003) 1.02 .025 (.040 .001) .432 .127 (.017 .005) .20 .025 (.008 .001) 2.16 MAX. (.085) 2.54 TYP. (.100 TYP.) 4.09 0.20 (0.161 0.008) PC Board Pattern (Top View) 2.54 0.127 (0.100 0.005) 5.66 0.14 (0.223 0.005) 1.448 (0.057) 0.889 (0.035) Tape and Reel Packaging for 4 pin SOIC package 330.2 DiA (13.00") 3.0 R Top Cover Tape Thickness 3.8 0.102 MAX _ 4.70 + 0.15 TYP (0.004) _ 6.50+ 0.15 4.2 A 8.00 1.5 dia .3 R MAX TYP 12.00 _ 5.50 + .10 _ 2.30 + 0.15 1.50 1.60 A _ 2.00 + .05 _ 4.00 + .10 1.75 .30 _ 2.7 + 0.15 SECTION A-A Embossed Carrier Embossment Dimensions mm (inches) Rev. 1.0 www.clare.com 5 For additional information please visit our website at: www.clare.com Clare, Inc. makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in Clare's Standard Terms and Conditions of Sale, Clare, Inc. assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right. The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other applications intended to support or sustain life, or where malfunction of Clare's product may result in direct physical harm, injury, or death to a person or severe property or environmental damage. Clare, Inc. reserves the right to discontinue or make changes to its products at any time without notice. Specification: DS-CPC1150N-R1.0 (c)Copyright 2001, Clare, Inc. OptoMOS(R) is a registered trademark of Clare, Inc. All rights reserved. Printed in USA. 10/11/01 |
Price & Availability of CPC1150N
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |